FZ-1 Accessory Fuse Block for the Polaris Slingshot

Polaris Slingshot Accessory Fuse Block
Do you plan on adding 12 volt accessories to your Slingshot such as a Radar Detector, Halo Lighting Kit, Horn Relay, CB Radio, Under Carriage Lighting, etc? If the answer is yes, than our Fuse Block is an essential upgrade for you. This fuse box allows you to run up to 6 independently fused circuits with a max current draw of up to 10amps per circuit. What differs this fuse box from your ordinary fuse box is the on board relay allows you to select whether you want your circuit to be powered by full time +12 volts or Ignition +12 volts. The optional installation harness will come with all the wiring you need to successfully and safely install this accessory fuse box in your slingshot.

Optional Wiring Harness Contents:

• 8' ft. of 12 Gauge Primary Power Wire with 30amp Fuse Holder and Ring Terminal
• 1'ft. of 12 Gauge Primary Ground Wire with Ring Terminal
• 6' ft. of 18 Gauge Remote wire with 3 amp fuse holder
• 15' ft of 1/4" black split plastic wire looming
• 1 Posi-Tap No Splice, No Crimp Connector for Yellow Remote Wire
• 10 Black 8" Zip Ties