BatteryMinder 12V 2/4/8 Amp Battery Charger, Maintainer & Desulfator for AGM & Lithium Ion Batteries (Yuasa / Optima / MotoBatt / AntiGravity)

BatteryMINDer® 12-Volt 2/4/8 AMP Lead Acid Charger-Maintainer-Desulfator & Lithium Charger Maintainer
User-Selectable Settings for All Sealed / Wet (filler cap) /Maintenance-Free / AGM / Deep Cycle / RV / Marine / PLT and Odyssey brand Lead-Acid** based Batteries. Diagnoses battery’s condition – can predict failing batteries before they die. For ALL 12-Volt Sealed and Wet “Filler Caps” Batteries Including AGM, PLT, and Odyssey®. This BatteryMINDer® is an Odyssey-approved charger.  

Selecting the Correct Amperage for Lead Acid Batteries:
All BatteryMINDers are regulated and will not overcharge, no matter what amp selection you make. It is just a matter of how fast you need to charge the battery.

• If you know the battery is charged and in good shape use the 2 Amp setting.
• If you are charging a large deep cycle battery or more than one battery then use the 4 Amp setting.
• You will probably use the wet/AGM/sealed selection most of the time. Use the Odyssey selection on all named Odyssey batteries at the 8 Amp setting.
• Guaranteed to never overcharge/undercharge between temperature extremes considered safe to charge or maintain by major battery manufacturers.
• Push-button Selection for ALL battery types and charge rates.
• 100% Full-Time U.S. Patented Pulse-type Desulfation keeps Lead Acid battery free of sulfate or dissolves sulfate completely in older batteries.
• Detects and rejects batteries with bad cells.
• Maximize battery life and capacity, and recovers weak batteries.
• Diagnoses battery’s condition / state-of-charge.
• Recovers weak or deeply discharged batteries: including but not limited to flooded filler cap, maintenance-free, valve-regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle, and hybrid.
• Auto-Restart after power failure.
• Bad cell detection with auto-shutdown.
• Includes Short circuit, spark, reverse polarity protection, thermal runaway protection, automatic D/C disconnect on A/C failure, and quick-connect/disconnect fused alligator clip assembly.
• Very high efficiency. California CEC Approved.
• Automatically detects input AC power.
• ECO-mode with hi-efficiency / low power consumption.
• Ambient temperature compensation. Built-in temperature sensor automatically adjusts charge rate to ensure full charge between temperature extremes considered safe to charge or maintain by major battery manufacturers.
• 18 LED indicators show state-of-charge and important status mode/battery condition.
• Rugged, vibration-resistant construction.
• Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check its condition can result in a serious safety hazard.
• Not for nickel–cadmium (NiCad), nickel–metal hydride (NiMH), or aircraft batteries.

• Charger-Maintainer-Desulfator
• 6' AC cord, 6' DC cord with quick connector (SAE)
• Auto-Temp Compensation Sensor (Installed)
• Insulated Battery Clip Cord Set with Quick Connector and 15A replaceable fuse
• Ring Terminal Cord Set with Quick Connector and 15A replaceable fuse